Model C

Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.

Model C There are 94 products.

per page
Showing 26 - 50 of 94 items
  • £9.00

    For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.

    £9.00
  • £7.00

    For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...

    £7.00
  • £6.00

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    £6.00
  • £5.00

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    £5.00
  • £5.00

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.

    £5.00
  • £5.00

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    £5.00
  • £5.00

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.

    £5.00
  • £5.00

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    £5.00
  • £4.00

    For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.

    £4.00
  • £4.00

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    £4.00
  • £4.00

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    £4.00
  • £3.50

    This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.

    £3.50
  • £3.00

    For use with Model A, B, C, D and E Indoor Rowers. This is a 100ml bottle of 3-in-one multipurpose oil. Recommended to lubricate the chains on Concept2 Indoor Rowers Models A, B, C, D and E.

    £3.00
  • £3.00

    For use with Model A, B, C and original D Indoor Rowers (made before July 21, 2006) only. If your indoor rower was made after July 21, 2006, order part number 1517 instead. Two per machine. Sold individually.

    £3.00
  • £3.00

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    £3.00
  • £3.00

    For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.

    £3.00
  • £2.00

    For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.

    £2.00
  • £2.00

    For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.

    £2.00
  • £2.00

    For use with Model C Indoor Rowers. This is the plastic piece on top of the box frame that covers the opening where the chain passes through. Designed to prevent the chain from hopping off the sprocket.

    £2.00
  • £2.00

    For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.

    £2.00
  • £2.00

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    £2.00
Showing 26 - 50 of 94 items