Model B

Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

Model B There are 46 products.

per page
Showing 1 - 25 of 46 items
  • £155.00

    Our most advanced Performance Monitor. Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (sold separately), and is backlit for improved visibility in low light environments. See more info. Important! Be sure to select the correct machine (under "For which machine? Please choose.") when purchasing this part.

    £155.00
  • £84.00

    For use with Model B Indoor Rowers only. Includes the most common wear and tear parts to keep your Model B in top condition. See more info.

    £84.00
  • £70.00

    For use with the Model A and B Indoor Rower (Ergometer) only. This seat assembly includes the seat top, carriage, seat rollers and hardware.

    £70.00
  • £39.00

    For use with Model B Indoor Rowers. This 10ft long chain comes with a brass swivel at the handle end and chain connectors for the inside end. Fits Model B Indoor Rowers only. If your chain is badly rusted, has seized links or is broken, replace it with this part. See more info.

    £39.00
  • £34.00

    For use with the Model A and B Indoor Rower (Ergometer) only. This is the seat top and carriage only. Does not include hardware or seat rollers.

    £34.00
  • £34.00

    For use with Model A and B Indoor Rowers. Order this kit if you want to upgrade your Model A or B with the style flexfeet standard on new indoor rowers. New flexfeet provide wider range of motion, greater security for the heel, easier adjustability to accommodate a wide range of foot sizes. See more info.

    £34.00
  • £25.00

    For use with Model B and later Model A Indoor Rowers. 10 foot, black and white flecked elastic shock cord (or bungee cord) that recoils the chain on recovery. Includes two 1-1/8" shock cord pulleys. Fits only Model B Indoor Rowers (Ergometers) and later Model A Indoor Rowers. See more info.

    £25.00
  • £20.00

    For use with the Model A and B Indoor Rower (Ergometer) only.

    £20.00
  • £20.00

    For use with Model B Indoor Rowers only. This is the 2" x 1-5/8" x 5/8" plastic travelling pulley assembly with gear used to connect the shock cord to the chain. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the rower monorail on every stroke. One per machine. See more info.

    £20.00
  • £20.00

    For use with Model B Indoor Rowers only. Sprockets (gears) for the Model B flywheel axle. Includes both inner (15 tooth) and outer (13 tooth) sprockets. A new chain (part number 280) is also strongly recommended if you are replacing sprockets. The Flywheel Cog Tool Set (part number 484) is required to change sprockets and should be added to your order...

    £20.00
  • £20.00

    For use with Model B Indoor Rowers only. 20" long pickup (sensor) and cable (wire) that transmit flywheel motion to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely...

    £20.00
  • £16.00

    For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. Handle is 19" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...

    £16.00
  • £16.00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    £16.00
  • £12.50

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    £12.50
  • £11.00

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers and its hardware (order a quantity of three per indoor rower) that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside) and includes all of the mounting hardware (nut, bolt, and spacers) that holds it into the...

    £11.00
  • £11.00

    For use with the Model A and B Indoor Rower (Ergometer) only.  This is the heel rest for the Model A and B Indoor Rower (Ergometer). Includes two screws, washers and wing nuts. See more info.

    £11.00
  • £9.00

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.

    £9.00
  • £8.00

    For use with the Model A, B, updated D, and E Indoor Rowers. These caster wheels fit on your indoor rower´s front foot in place of the molded foot cap enabling easy movement for storage or use in another location.

    £8.00
  • £7.50

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine.

    £7.50
  • £7.50

    For use with Model A and B Indoor Rowers. This is the right footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.

    £7.50
  • £7.50

    For use with Model A and B Indoor Rowers. This is the left footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.

    £7.50
  • £4.00

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    £4.00
  • £4.00

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    £4.00
Showing 1 - 25 of 46 items