skip to main content
Model A
Parts listed here are compatible with Model A Indoor Rowers. Model As were manufactured from 1981–1986.

Model A There are 33 products.

per page
Showing 1 - 25 of 33 items
  • £184.00

    For use with Model A Indoor Rowers only. Includes the most common wear and tear parts to keep your Model A in top condition. See more info.

    £184.00
  • £118.50

    For use with the Model A and B Indoor Rower (Ergometer) only. This seat assembly includes the seat top, carriage, seat rollers and hardware.

    £118.50
  • £47.00

    For use with Model A and B Indoor Rowers. Order this kit if you want to upgrade your Model A or B with the style flexfeet standard on new indoor rowers. New flexfeet provide wider range of motion, greater security for the heel, easier adjustability to accommodate a wide range of foot sizes. See more info.

    £47.00
  • £41.00

    For use with the Model A and B Indoor Rower (Ergometer) only.

    £41.00
  • £33.00

    For use with Model B and later Model A Indoor Rowers. 10 foot, black and white flecked elastic shock cord (or bungee cord) that recoils the chain on recovery. Includes two 1-1/8" shock cord pulleys. Fits only Model B Indoor Rowers (Ergometers) and later Model A Indoor Rowers. See more info.

    £33.00
  • £29.50

    For use with Model A Indoor Rowers only. Chain is 10´ long and comes with the lap link for the inside end. Fits on Model A Indoor Rowers (Ergometers) only. If your chain is badly rusted, has seized links, or is broken, you will need to replace it. See more info.

    £29.50
  • £20.00

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers and its hardware (order a quantity of three per indoor rower) that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside) and includes all of the mounting hardware (nut, bolt, and spacers) that holds it into the...

    £20.00
  • £17.50

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    £17.50
  • £17.50

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    £17.50
  • £15.50

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.

    £15.50
  • £12.00

    For use with the Model A and B Indoor Rower (Ergometer) only.  This is the heel rest for the Model A and B Indoor Rower (Ergometer). Includes two screws, washers and wing nuts. See more info.

    £12.00
  • £11.00

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine.

    £11.00
  • £9.00

    For use with the Model A, B, updated D, and E Indoor Rowers. These caster wheels fit on your indoor rower´s front foot in place of the molded foot cap enabling easy movement for storage or use in another location.

    £9.00
  • £8.50

    For use with Model A and B Indoor Rowers. This is the right footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.

    £8.50
  • £8.50

    For use with Model A and B Indoor Rowers. This is the left footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.

    £8.50
  • £5.50

    For use with Model A, B, C, D and E Indoor Rowers. This is a 100ml bottle of 3-in-one multipurpose oil. Recommended to lubricate the chains on Concept2 Indoor Rowers Models A, B, C, D and E.

    £5.50
  • £4.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    £4.50
  • £4.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    £4.50
  • £3.90

    For use with Model A and B Indoor Rowers. This chain slide protects the chain as it enters and exits the monorail in the front of the indoor rower.

    £3.90
  • £3.30

    For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.

    £3.30
  • £2.20

    For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.

    £2.20
  • £2.20

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    £2.20
Showing 1 - 25 of 33 items