No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
Model E There are 98 products.
-
£9.40
Flexfoot & Footstretcher Cover, Right, 7...
For use with Model D RowErgs manufactured from August 2006–present, Model E RowErgs and Dynamic RowErgs. 7 Screw Holes. See more info.
£9.40 -
£9.00
Foot Caster, Left and Right
For use with the Model A, B, updated D, and E Indoor Rowers. These caster wheels fit on your indoor rower´s front foot in place of the molded foot cap enabling easy movement for storage or use in another location.
£9.00 -
£8.00
Seat Frame Kit—Model C, D, E
For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.
£8.00 -
£6.50
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
£6.50 -
£6.00
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.
£6.00 -
£6.00
Flexfoot, Gray
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
£6.00 -
£5.56
Seat Roller (Bottom) with Hardware
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.
£5.56 -
£5.50
Chain Oil
For use with Model A, B, C, D and E Indoor Rowers. This is a 100ml bottle of 3-in-one multipurpose oil. Recommended to lubricate the chains on Concept2 Indoor Rowers Models A, B, C, D and E.
£5.50 -
£4.50
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
£4.50 -
£4.50
Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
£4.50 -
£4.50
Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
£4.50 -
£3.80
T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
£3.80 -
£3.35
Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
£3.35 -
£3.30
Upper Die Cast Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£3.30 -
£3.30
Footstrap
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
£3.30 -
£3.30
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
£3.30 -
£3.30
Lower Die Cast Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£3.30 -
£3.30
Footstretcher Cover, Left
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
£3.30 -
£3.30
Footstretcher Cover, Right
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
£3.30 -
£3.00
Chain Guide—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.
£3.00 -
£2.70
Monorail Bolt Support—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£2.70 -
£2.70
Hanger Shaft, threaded
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.
£2.70 -
£2.40
17mm Bearing—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.
£2.40 -
£2.20
-
£2.20
Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
£2.20
