No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
RowErgs There are 136 products.
Subcategories
-
£15.50
Seat Roller
For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.
£15.50 -
£15.00
Deluxe Seat Pad
Let’s face it: the backside works hard during rowing. If you prefer a bit more padding, try our seat pad. Made from 12mm textured rubber, this provides the comfiest row around with cut out sections in the middle for the pelvis and at the rear to accommodate the coccyx. The seat pad can be easily transferred between machines.
£15.00 -
£14.00
-
£12.50
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
£12.50 -
£12.00
Heel Rest—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is the heel rest for the Model A and B Indoor Rower (Ergometer). Includes two screws, washers and wing nuts. See more info.
£12.00 -
£11.00
-
£9.40
Flexfoot & Footstretcher Cover, Right, 7...
For use with Model D RowErgs manufactured from August 2006–present, Model E RowErgs and Dynamic RowErgs. 7 Screw Holes. See more info.
£9.40 -
£9.40
Flexfoot & Footstretcher Cover, Left, 7...
For use with Model D RowErgs manufactured from August 2006–present, Model E RowErgs and Dynamic RowErgs. 7 Screw Holes. See more info.
£9.40 -
£8.50
Footboard, Left—Model A, B
For use with Model A and B Indoor Rowers. This is the left footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.
£8.50 -
£8.00
Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
£8.00 -
£6.50
Chain Guard with Screw and Nut
For use with Model B Indoor Rowers. This is the chain guard for the Model B. Kit includes two screws and two washers.
£6.50 -
£6.50
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
£6.50 -
£6.00
-
£6.00
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.
£6.00 -
£5.56
Seat Roller (Bottom) with Hardware
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.
£5.56 -
£5.50
Guide Bracket, Left, Black
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.
£5.50 -
£5.50
Guide Bracket, Right, Black
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
£5.50 -
£5.50
Chain Oil
For use with Model A, B, C, D and E Indoor Rowers. This is a 100ml bottle of 3-in-one multipurpose oil. Recommended to lubricate the chains on Concept2 Indoor Rowers Models A, B, C, D and E.
£5.50 -
£5.50
Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
£5.50 -
£4.50
-
£4.50
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
£4.50 -
£4.50
Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
£4.50 -
£4.50
Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
£4.50 -
£3.80
Monorail Bolt Tube
This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.
£3.80 -
£3.80
T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
£3.80
