No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Model D, Original
General Information
Parts listed here are compatible with Model Ds manufactured from July 14, 2003 to July 21, 2006 (serial numbers 071403 to 072106
Model D, Original There are 91 products.
-
£2.00
Technique Label—RowErg
For use on RowErgs and Model C, D and E Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.
£2.00 -
£1.90
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
£1.90 -
£1.80
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
£1.80 -
£1.30
Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
£1.30 -
£1.20
Slotted Chain Swivel Bushing—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This swivel bushing is installed at the swivel/handle end of the chain to prolong chain life and provide smoother rowing. See more info.
£1.20 -
£1.20
Handle U-bolt
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic.
£1.20 -
£1.20
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
£1.20 -
£1.10
Foot Belly Reinforcing Bracket— Model D, E
For use with all Model D and Model E Indoor Rowers. This part is found inside the foot bellies. Order two per foot belly. See more info.
£1.10 -
£1.10
Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
£1.10 -
£1.10
-
£0.76
Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
£0.76 -
£0.65
S.C.A.M.—Model C, D, E
For use on the Model C, D and E Indoor Rower. SCAM stands for Shock Cord Adjustment Mechanism. This part holds each end of the shock cord. Order two per machine.
£0.65 -
£0.60
Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
£0.60 -
£0.55
Perf Connector, Screw Side
For use on all Model D, E, Dynamic Indoor Rowers, SkiErgs and BikeErgs. This is the screw side connector for the perf outlet. See more info.
£0.55 -
£0.55
Perf Connector, Nut Side
For use on all Model D, E, Dynamic Indoor Rowers, SkiErgs and BikeErgs. This is the nut side connector for the perf outlet. See more info.
£0.55 -
£0.52
17mm Bearing Cup—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately). See more info.
£0.52 -
£0.50
Screw, 3/8-16 x 1-1/4
This is the bottom seat roller screw used on the Model C, D and E Indoor Rower. See more info.
£0.50 -
£0.40
End Cap Hook—Model C, D, E
For use on the Model C, D and E Indoor Rower. This part is used to hold the front end cap in place.
£0.40 -
£0.36
R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
£0.36 -
£0.35
Spacer, Traveling Pulley—Model C, D, E,...
For use on all Model C, D, E and Dynamic Indoor Rowers. This is the 5/8 inch long spacer found in the return mechanism's travelling pulley. Also used in the monitor arm assembly on the Dynamic Indoor Rower.
£0.35 -
£0.35
Flywheel Cover Bolt 10 x 3
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.
£0.35 -
£0.35
Screw, 6-lobe, 1/4-20 x 3/8
This is the handle hook screw on the Model C, D and E Indoor Rower. See more info.
£0.35 -
£0.30
-
£0.30
Seat Spacer—Model C, D, E, SkiErg
For use on all Model C, D and E Indoor Rowers. This is the 1/4 inch long seat spacer used in the hardware of the seat assembly. Order six for each seat assembly. Also used on all SkiErgs. See more info.
£0.30 -
£0.25
Screw, 6-lobe, 1/4-20 x 3/4
Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
£0.25
