No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
Parts There are 164 products.
Subcategories
-
Model A
Parts listed here are compatible with Model A Indoor Rowers. Model As were manufactured from 1981–1986. -
Model B
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
-
Model C
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
-
Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003 to July 21, 2006 (serial numbers 071403 to 072106
-
Model D, Updated
Parts listed here are compatible with Model D Indoor Rowers manufactured from July 31, 2006–present (serial numbers 073106–present).
-
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
-
Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
-
£2.20
Mouse—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£2.20 -
£2.20
-
£2.20
Upper Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£2.20 -
£2.20
-
£2.20
-
£2.20
-
£2.20
Wing Nut, Heel Rest—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This screw is part of the heel rest assembly.
£2.20 -
£2.00
Technique Label—RowErg
For use on RowErgs and Model C, D and E Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.
£2.00 -
£1.90
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
£1.90 -
£1.90
-
£1.80
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
£1.80 -
£1.50
-
£1.30
Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
£1.30 -
£1.30
-
£1.20
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
£1.20 -
£1.20
Handle U-bolt
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic.
£1.20 -
£1.10
Foot Belly Reinforcing Bracket— Model D, E
For use with all Model D and Model E Indoor Rowers. This part is found inside the foot bellies. Order two per foot belly. See more info.
£1.10 -
£1.10
Bearing Cup—Model B
For use on all Model B Indoor Rowers. This is the rubber bearing cup that holds the R8 bearing (part number 232, sold separately).
£1.10 -
£1.10
-
£1.10
Bolt, 3/8 x 4—Model D
For use with Model D Indoor Rowers manufactured from August 2006–present. This bolt attaches the guide bracket to the monitor arm. See more info.
£1.10 -
£1.10
Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
£1.10 -
£1.10
-
£1.10
SCAM—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. The is the S.C.A.M. that secures the static end of the shock cord in the return mechanism. See more info.
£1.10 -
£1.10
Screw, Heel Rest, B—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This screw is part of the heel rest assembly.
£1.10 -
£1.10
Compression Member
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
£1.10
